Get webhook notifications whenever Network & Infrastructure creates an incident, updates an incident, resolves an incident or changes a component status.
Date: 2010-08-11 00:44:43 UTC A manipulation error on rbx-56 (clear conf 3) caused the reset of the configuration of the card 3 into rbx-56. but in CatOS, the ports do not pass \"disable/shutdown\" by default. and so all the routers roubaix 1 were connected together on a big loop.
We have disconnected the card after 6-7 minutes.
The loop has impacted the router rbx-1 and the memory has exploded. The routing was with the loss of packets;
We decided to cut off all the cards and let-2 rbx manage the situation. What he has done very well.
Next, check the configuration and reboot the rbx-1.
the situation is stable now.
The good news: the vss-2 has not been impacted by this outage. This proves that the work that we did had a good impact on the router's stability.
Date: 2010-08-11 00:40:05 UTC The router rbx-1-6k is unstable due to memory allocation problems which has impacted the routing. The router is being restarted. The routing on roubaix1 is ensured by rbx-2-6k.