Get webhook notifications whenever Network & Infrastructure creates an incident, updates an incident, resolves an incident or changes a component status.
The router has suddenly stopped to work. We are looking
at the origin of the problem.
Update(s):
Date: 2012-05-02 05:13:52 UTC The card is up. Everything is fine.
We will restore traffic. Everything is fine.
Anyway,we will wait a few days before reloading completely g2 with patches.
Date: 2012-05-02 05:10:52 UTC RP/0/RSP0/CPU0:rbx-g1-a9(admin)#hw-module location 0/2/CPU0 reload
Wed May 2 03:54:33.309 UTC
WARNING: This will take the requested node out of service.
Do you wish to continue?[confirm(y/n)]y
RP/0/RSP0/CPU0:rbx-g1-a9(admin)#
Date: 2012-05-02 05:10:37 UTC The traffic has been rerouted from g1. We can reload the card.
Date: 2012-05-02 05:09:25 UTC We will reload the card to check if that fixes the warning.
Date: 2012-04-24 15:42:03 UTC The router is stable, we are looking for the origin of the problem.
Date: 2012-04-24 15:41:20 UTC The router took OSPF and hoovered the trafic of Roubaix
and then when the BGP was up , it restarted to routr.
We should have had 30 seconds floating
Date: 2012-04-24 14:44:57 UTC One of the 2 RP seems not to work.
We're doing switchover.
RP/0/RSP0/CPU0:rbx-g1-a9# redundancy switchover ?
location Location of active node
RP/0/RSP0/CPU0:rbx-g1-a9# redundancy switchover
Tue Apr 24 14:30:56.991 UTC
Proceed with switchover 0/RSP0/CPU0 -> 0/RSP1/CPU0? [confirm]
Initiating switch-over.
platform_kdump_init: