OVHcloud Bare Metal Cloud Status
Current status
Legend
- Operational
- Degraded performance
- Partial Outage
- Major Outage
- Under maintenance
FS#6000 — network switch 46.105.110.0/24 et 111.0/24
Scheduled Maintenance
Report for Bare Metal Cloud
Completed
Following the task http://status.ovh.net/?do=details&id=2020, we will
back to normal status tomorrow morning between 5 and 7 o'clock.
Several but very short network disconnection will take place.
Update(s):
Date: 2011-10-28 10:36:37 UTC
The restoration of this link has been well achieved.
The balance is that the problem came from the VPC. A reboot of both devices at the
same time was needed.
The only way was to reset the original configuration and reboot the two switches at the same time.
We will probably do so next time: Following a loss of one of the
VPs equipment ,We MUST reboot the two devices to find
redundancy without problems. We will talk about this problem to cisco
Date: 2011-10-28 10:22:46 UTC
Last step:restore the redundancy links to both routers.
We have just re-enable the 2nd link to the main router.
Date: 2011-10-28 09:45:26 UTC
Trying to simplify the configuration in many ways,we did not succeed.
we have restarted everything from 0 starting from the backup and after a reboot of the switches,
it works.
The problem is back few minutes after returning to normal status, we are still in doubt.
Date: 2011-10-28 09:23:35 UTC
We are still on the problem.
Date: 2011-10-28 09:21:57 UTC
The original problem is still present, we look once again on how to stabilize the infrastructure.
Date: 2011-10-28 09:16:24 UTC
The servers with ASA firewall have been still impacted by the switch.
Fixed.
Date: 2011-10-28 09:14:59 UTC
We have had problems with the SLA server which did not respond to ping
on the network so it announced that the servers are
down while they have been responding to ping for several minutes already.
This problem is fixed and all servers are UP.
We check again.
Date: 2011-10-28 08:53:10 UTC
The replacement has been very long because of physical complications but it's over.
The conf has been implemented in the two switches, we check that everything is in redundant mode
Date: 2011-10-28 08:50:10 UTC
The simple recommended reboot by cisco did not restore the functioning.
Once again We have cut the .248 but the network does not respond to ping at all.
Currently We will replace the two devices.
Date: 2011-10-28 08:35:33 UTC
The works have been started.
back to normal status tomorrow morning between 5 and 7 o'clock.
Several but very short network disconnection will take place.
Update(s):
Date: 2011-10-28 10:36:37 UTC
The restoration of this link has been well achieved.
The balance is that the problem came from the VPC. A reboot of both devices at the
same time was needed.
The only way was to reset the original configuration and reboot the two switches at the same time.
We will probably do so next time: Following a loss of one of the
VPs equipment ,We MUST reboot the two devices to find
redundancy without problems. We will talk about this problem to cisco
Date: 2011-10-28 10:22:46 UTC
Last step:restore the redundancy links to both routers.
We have just re-enable the 2nd link to the main router.
Date: 2011-10-28 09:45:26 UTC
Trying to simplify the configuration in many ways,we did not succeed.
we have restarted everything from 0 starting from the backup and after a reboot of the switches,
it works.
The problem is back few minutes after returning to normal status, we are still in doubt.
Date: 2011-10-28 09:23:35 UTC
We are still on the problem.
Date: 2011-10-28 09:21:57 UTC
The original problem is still present, we look once again on how to stabilize the infrastructure.
Date: 2011-10-28 09:16:24 UTC
The servers with ASA firewall have been still impacted by the switch.
Fixed.
Date: 2011-10-28 09:14:59 UTC
We have had problems with the SLA server which did not respond to ping
on the network so it announced that the servers are
down while they have been responding to ping for several minutes already.
This problem is fixed and all servers are UP.
We check again.
Date: 2011-10-28 08:53:10 UTC
The replacement has been very long because of physical complications but it's over.
The conf has been implemented in the two switches, we check that everything is in redundant mode
Date: 2011-10-28 08:50:10 UTC
The simple recommended reboot by cisco did not restore the functioning.
Once again We have cut the .248 but the network does not respond to ping at all.
Currently We will replace the two devices.
Date: 2011-10-28 08:35:33 UTC
The works have been started.