FS#1327 — FS#5328 — rbx-2-6k
Attached to Project— Network
Incident | |
Whole Network | |
CLOSED | |
![]() |
crash of the router
Queued messages:
*** System received a Cache Parity Exception ***
signal= 0x14, code= 0xa0000000, context= 0x46637f54
PC = 0x42d9f8b4, SP = 0x44947898, RA = 0x413e7d20
Cause Reg = 0x00007c20, Status Reg = 0x34018002
rommon 1 >
Apr 8 17:47:37 GMT: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
Apr 8 17:47:37 GMT: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
Apr 8 17:47:37 GMT: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
No warm reboot Storage
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x4439fb74
PC = 0x417b9fc8, Cause = 0x1c20, Status Reg = 0x34008002
Date: Saturday, 09 April 2011, 05:10AMQueued messages:
*** System received a Cache Parity Exception ***
signal= 0x14, code= 0xa0000000, context= 0x46637f54
PC = 0x42d9f8b4, SP = 0x44947898, RA = 0x413e7d20
Cause Reg = 0x00007c20, Status Reg = 0x34018002
rommon 1 >
Apr 8 17:47:37 GMT: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
Apr 8 17:47:37 GMT: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
Apr 8 17:47:37 GMT: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
No warm reboot Storage
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x4439fb74
PC = 0x417b9fc8, Cause = 0x1c20, Status Reg = 0x34008002
Reason for closing: Done
The router is up and is taking back slowly
all the trafic from RBX1 as soon as the
cards restart.
Processing early notification of crash
condition..
Apr 8 17:47:32 GMT: %C6K_PLATFORM-SP-2-PEER_RESET: SP is being reset
by the RP
%Software-forced reload
17:47:32 GMT Fri Apr 8 2011: Breakpoint exception, CPU signal 23, PC
= 0x417C7010
We are going to open the replacement of the 4 modules.
These modules seem not to work good under the
IOS SXI version.
The router does not work well. We are restarting the 4 cards
that have problems without netflow.
rbx-2-6k(config)#no power enable module 6
%Power admin state updated
rbx-2-6k(config)#no power enable module 7
%Power admin state updated
rbx-2-6k(config)#no power enable module 8
%Power admin state updated
rbx-2-6k(config)#no power enable module 9
%Power admin state updated
rbx-2-6k(config)# power enable module 9
%Power admin state updated
rbx-2-6k(config)# power enable module 8
%Power admin state updated
rbx-2-6k(config)# power enable module 7
%Power admin state updated
rbx-2-6k(config)# power enable module 6
%Power admin state updated