Get webhook notifications whenever Network & Infrastructure creates an incident, updates an incident, resolves an incident or changes a component status.
The router crushed completely with 2 additional cards.
We just cut it electrically ,currently it is booting.
Update(s):
Date: 2011-03-29 04:34:09 UTC #1 has been changed.
Date: 2011-03-29 04:33:44 UTC Since the card #2 has been already changed. we are going to change card #1.
The router has been switched on the card #2. the #1 has been restarted and blocked during the boot.
We are replacing it.
Date: 2011-03-29 04:31:36 UTC The whole router was crashed again. There is a card which crashed all the router.
It needs to be found. Or else it's the whole frame.
Date: 2011-03-28 22:04:45 UTC We have just removed the netflow. The router is not overloading anymore.
Date: 2011-03-28 20:39:57 UTC We reinserted the original card #1 and replaced the card #2 by the spare then tested a switchover to switch back to card #2 without causing a new defect.
We keep closely monitoring the running of the router.
Date: 2011-03-28 19:33:12 UTC Impossible to remount the card #1 in standby :
Standby supervisor 1 redundancy/power mgmt board detection mismatch
The problem must come from the card #2. We must force a whole restarting
on the card #1 in order to go back to a stable status.
Date: 2011-03-28 19:30:50 UTC The card #1 shows also signs of bugs. We will replace it.
Date: 2011-03-28 19:29:40 UTC The router was literalyy \"shut down\" for the second time in 48 hours
but it does not give any precise indication. We suspect nevertheless
the card #5 to be the cause of the problem. We replace it.
Date: 2011-03-28 17:02:09 UTC The router has just crashed again.